h1  
ALL CATEGORIES OPEN

현재 위치

  1. 게시판
  2. Support

Support

Support

게시판 상세
제목 PSA12 APLUS [Firmware Overwrite]
작성자 NV Connect (ip:)
  • 작성일 2019-03-02
  • 추천 추천하기
  • 조회수 333
평점 0점

Please follow below instructions for the PSA12 APLUS upgrade.


Step 1. Download Below Files
Download Link For Navitech Firmware Upgrade Kit

https://www.dropbox.com/s/nv15n5270cqbmnz/Navitech Firmware upgrade tool.zip?dl=0

 

Download Link for PSA12 APLUS Firmware

https://www.dropbox.com/s/e3fouo6htwiykio/PSA12%2020170420.zip?dl=0

Download and unzip the file.

 

Step 2. Remove all connectors from the video interface for update process

and prepare the mini usb to usb connector for connecting the video interface to the PC.

You do not need any additional power source to the interface for the update except mini usb connection to the pc.

 


-Firmware Upgrade Tool Installation to the Windows PC-

1. Unzip Navitech Firmware Upgrade Tool

2. Open Win7 Folder

3. Install One Driver According to your PC System (right click MY PC -> Properties -> System Check 64bit or 84bit)

-dpinst_amd64 = 64bit

-dpinst_x86 = 86bit


-Begin Firmware Upgrade Procedure-

You have to upgrade 2 different devices (MAIN BOARD UNIT and CAN MODULE which is located between the main harness and can harness)

 

- First Main Board Unit Upgrade -

1. Run "navitech_update_tool".

2. Check "Insert" box on the bottom of the program.

3. Add all the bin files previously unzipped from PSA12 APLUS Firmware (Except NV1_ST_08010000_PSA12_CAN_BOARD file. 

5. Check "Auto update" on the bottom of the program.

6. Connect Interface (Module) to PC by mini usb to usb connector.

7. Interface will automatically be detected from the PC and proceed update.

8. Disconnect when the update process is ended (No red led blinking)

 

- Second Can Module Upgrade -

1. Run "navitech_update_tool".

2. Click "Insert" button.

3. Add "NV1_ST_08010000_PSA12_CAN_BOARD" firmware file previously downloaded.

5. Check "Auto update" on the bottom of the program.

6. Connect Interface (Module) to PC by mini usb to usb connector.

7. Interface will automatically be detected from the PC and proceed update.

8. Disconnect when the update process is ended (No red led blinking)

 

Now, Install to the car and Check all the functions work perfectly.

 

첨부파일
비밀번호 수정 및 삭제하려면 비밀번호를 입력하세요.
관리자게시 게시안함 스팸신고 스팸해제
목록 삭제 수정 답변
댓글 수정

비밀번호 :

수정 취소

/ byte

비밀번호 : 확인 취소

Customer Service
+82-10-3089-2411
WEEK : 09:00 ~ 18:00
LUNCH : 12:00 ~ 13:00
SAT, SUN, HOLIDAYS OFF
Sales Contact
sales@nvconnect.co.kr

NOTIFICATION
 
COMPANY INFORMATION